

Technical Description
• New vertical inline pump
• Original design by PURITY (patented)
• Both square motor & round motor available
• YE3 high efficient motor, with protection IP55 class F
• Pump case with anti-corrosive coating
• Impeller in stainless steel AISI 304 or cast iron
• Shaft in stainless steel AISI 304 or galvanized iron
• Galvanized counter flange with bolts, nuts and gaskets
• Quality NSK bearing, wear resistance mechanical seal
PT Vertical Inline Pump
TECHNICAL DESCRIPTION
New vertical inline pump
Original design by PURITY (patented)
Both square motor & round motor available
YE3 high efficient motor, with protection IP55 class F
Pump case with anti-corrosive coating
Impeller in stainless steel AISI 304 or cast iron
Shaft in stainless steel AISI 304 or galvanized iron
Galvanized counter flange with bolts, nuts and gaskets
Quality NSK bearing, wear resistance mechanical seal
APPLICATIONS
Suitable for use with clean water and liquids that are not chemically
aggressive towards the materials from which the pump is made.
The vertical inline pumps are recommended for use in water supply,
cleaning sets, pressure boosting, firefighting sets, irrigation, industrial
applications, water circulation in climatisation sets, agricultural.
USING LIMITS
Liquid temperature between -10℃ and +120℃
Ambient temperature up to +50℃
Max. working pressure 16 bar
Continuous service S1
PATENTS
Registered model PT
Registered Patent Design n°201530478501.6
CENTRIFUGAL PUMPS
- PW Same DN Centrifugal Pump
- PS Bare Shaft Centrifugal Pump
- PT Vertical Inline Pump
- PC Thread port Centrifugal Pump
- PV Vertical Multistage Centrifugal Pump
- P2C Double Impeller Centrifugal Pump
- PST EN733 Standard Centrifugal Pump
- WQV Vortex Cutting Submersible Pump
- Self-Priming Vortex Pump
- Stainless Steel Centrifugal Pumps
- Vertical Multistage SS Centrifugal Pump



1 | Pump Case | Cast iron |
---|---|---|
2 | Impeller | SS304/Cast iron |
3 | Mechanical Seal | SiC/Carbon/SS304 |
4 | O-ring | Rubber |
5 | Connection | Cast iron |
6 | Shaft | SS304/Cast iron |
7 | Reinforced Seal | Rubber |
8 | Bearing | Ball Bearing |
9 | Wound Stator/Rotor | Silicon Steel/Copper |
10 | Motor Case | Aluminum |
11 | Back Cover | Cast iron |
12 | Reinforced Seal | Rubber |
13 | Fan Cover | Aluminum |
14 | Fan | Plastic |
15 | Through Bolt | Steel |
16 | Terminal Box | Aluminum |
17 | Terminal Board | Plastic |
18 | Impeller Key | Iron |
19 | Water Deflector | Rubber |
20 | Connection Bolt | Steel |
21 | Impeller Nut | Galvanizated Steel |
22 | Release Valve | Brass |
23 |